Antares ATR-1a - Manual (Page 21)

21
To select a Program, move the cursor to the Program Number field and use
the data knob to choose the desired Program.
If the Program Mode Main Screen is displayed and MIDI Program Changes
are enabled in the SYSTEM menu, a MIDI Program Change command of 1–
50 will select the corresponding Program.
If the Program Mode Main Screen is displayed and the Foot Switch is set to
STEP in the SYSTEM menu, pressing the foot switch will step to the next
higher numbered Program.
To move to Song Mode (see below), move the cursor to the top line and
use the data knob to select Song Mode.
Song Mode Main Screen
When in Song Mode, this Main Screen appears as follows:
Song:XXaaaaaaaaaaaaa
Step:YYbbbbbbbbbbbbb
where XX is the song number, aaaaaaaaaaaaa is the song name, YY is the
Song Step number and bbbbbbbbbbbbb displays the name of the Program
or navigation message at Step YY.
To select a Song, move the cursor to the Song Number field and use the
data knob to choose the desired Song.
If the Song Mode Main Screen is displayed and MIDI Program Changes are
enabled in the SYSTEM menu, a MIDI Program Change command of 1–20
will select the corresponding Song.
If the Song Mode Main Screen is displayed and the Foot Switch is set to
STEP in the SYSTEM menu, pressing the Foot Switch will step to the next
non-”0" Song Step in the Song’s Step list.
When in Song Mode, the Speed and Vibrato settings programmed for the
selected Song override the Speed and Vibrato settings in any Programs
called up by Song Steps.