Antares ATR-1a - Manual (Page 48)

48
Put 0 into Step_Controller;
Put 7 into Sensitivity;
Put 0 into Detune;
Put 0 into Detune_Direction;
Send Sys_Ex Antares Device_Num Mode Msg_Length ¬
MIDI_Channel MIDI_Sustain Pgm_Change ¬
MIDI_Note Pitch_Bend Mod_Wheel ¬
Foot_Switch Speed_Controller Vib_Rate_Controller ¬
Vib_Delay_Controller Step_Controller Sensitivity ¬
Detune Detune_Direction¬
End_Sys_Ex;
This message sets Program data in the ATR-1a.
Put $F0 into Sys_Ex;
Put 0 1 $26 into Antares;
Put $F7 into End_Sys_Ex;
Put 0 into Device_Num;
Put 5 into Mode;
Put 31 into Msg_Length;
Put 28 into Pgm_Number;
Put 7 into Speed;
Put 1 1 1 1 1 1 1 1 1 1 1 1 into Scale;
Put 0 into Vib_Type;
Put 28 into Vib_Depth;
Put 53 into Vib_Rate;
Put 11 into Vib_Delay;
Put “My Test name.” into Name;
Send Sys_Ex Antares Device_Num Mode Msg_Length ¬
Pgm_Number Speed Scale Vib_Type Vib_Depth ¬
Vib_Rate Vib_Delay Name ¬
End_Sys_Ex;
This message sets Song data in the ATR-1a.
Put $F0 into Sys_Ex;
Put 0 1 $26 into Antares;
Put $F7 into End_Sys_Ex;
Put 0 into Device_Num;
Put 6 into Mode;
Put 34 into Msg_Length;
Put 5 into Song_Number;
Put 7 into Speed;