Antares ATR-1a - Manual (Page 33)

33
DETUNE SETTING A=HERTZ
-20 435
-16 436
-12 437
-8 438
-4 439
0 440
+4 441
+8 442
+12 443
+16 444
+20 445
This table can be extended in either direction by adding or subtracting 4
cents per Hertz, as appropriate.
MIDI Page 1
Channel Note Sustain
aaaa bbb ccc
The Channel parameter selects the channel over which the ATR-1a receives
MIDI messages. The choices include:
Individual MIDI channels 1–16 If an individual channel is selected, the
ATR-1a will respond to messages received on that channel only and will
ignore any messages on other channels.
OMNI If OMNI is selected, the ATR-1a will respond to messages on any
MIDI channel.
Setting the Note field to ON allows MIDI notes to define the scale used by
the ATR–1. Specifically, when Note is set ON, the scale of the currently
active Program is ignored. Instead, the ATR-1a continuously monitors the
MIDI input for Note On messages. At any instant, the scale used for
correction is defined by all MIDI notes that are on. For example, if MIDI
notes A, C and E are held, the ATR-1a input will be retuned to an A, C or E,
whichever is closest to the input pitch.