American Dynamics Tyco 8 - Manual (Page 29)

5-1
5 Installing IP SDU8 with a ROENDC End Cap
Preparing and installing the SDU8 Camera in an End Cap Assembly
The ROENDC End Cap retrofits any existing outdoor SpeedDome® wall, pole, corner, or over-the-
roof mount to accommodate the IP SDU8 housing.
Figure 5-1 ROENDC End Cap
Parts Supplied
• End Cap Assembly, 10101-0051-01
• Install Kit, 0351-2143-01
• Setscrew, 22821-0010-01
• Allen Wrench, 11400-0112-06
• Wrench, Torx, Tamperproof, 11400-0149-01
• Plug, Foam, 10505-0296-01
• Tape, Teflon, 1 roll, 3200-0229-01
Parts Required
• RJ-45 connector
• RJ-45 inline coupler adapter
• 3 way power connector, 2109-0651-03
• 6 way alarm connector, 2109-0648-06
• 5 way alarm connector, 2109-0650-05
Tools Required
• Screwdriver
• Pliers
• RJ-45 crimping tool