Aqua Products RP2100 - Manual (Page 4)

PART ONE - OWNER'S OPERATING INSTRUCTIONS
FOR YOUR SAFETY - READ BEFORE OPERATING
WARNING: IF YOU DO NOT FOLLOW THESE
INSTRUCTIONS EXACTLY, A FIRE OR
EXPLOSION MAY RESULT, CAUSING
PROPERTY DAMAGE, PERSONAL INJURY OR
LOSS OF LIFE.
SECTION 1 / START-UP PROCEDURES
Your Raypak Pool/Spa heater has been designed for years of safe and reliable pool/spa water heating. It is
available in millivolt or electronic control options. ASME certified units, typical used in commercial applications,
are also available. This manual provides operation, installation, maintenance, and service information for these
heaters.
If your heater has been installed correctly, operating the heater is an easy task. The upper front panel of the
heater contains the control center that allows you to turn the heater on or off and adjust the temperature settings
for the pool or spa. The temperature range is 65°F (18°C) to 104°F (40°C). The heater with the electronic control
option also has a manual switch located on the right cabinet side to allow you to turn the heater off. Section 4
contains more details about the use of the controls in the Controls Adjustments/Replacements sub-section.
BEFORE START-UP
BURNERS
4
Clean main burners, combustion fan and air louvers
of dust, lint and debris. Keep heater area clear and free
from combustibles, flammable liquids and chemicals. Do
not obstruct the flow of combustion and ventilating air.
WATER
Water must be flowing through the heater during
operation. Insure that system is filled with water and have
pump operating.
RP2100 DIGITAL IID CAPRON RP2100 DIGITAL IID ASME