Modular l-o-x air entry packages, Modular l-o-x – Ross Controls RIGHT ANGLE User Manual
Page 17
www.rosscontrols.com 17
Air Entry Packages with Sensing Valve
and with Control Reliable Energy Isolation
Model
Air Entry
Port Size
C
V
Dimensions
(inches/mm)
Number* Type In-Out Exh. 1 to 2 2 to 3 Length
Width
Depth
Cat-2 with SV27
RC208-09
FR
1/2
1
6.3
9.2
14.80 (374.9)
11.00 (279.0) 6.60 (167.7)
Cat-2 with SV27
RC208L-09 FRL 1/2 1 6.3 9.2 14.80 (374.9)
11.00 (279.0) 6.60 (167.7)
Cat-3 with DM
1
Series E
RC304-09
FR
1/4
1/2
1.3
2.4
13.00 (330.0)
11.00 (279.0) 5.40 (134.7)
Cat-3 with DM
1
Series E
RC306-09
FR
3/8 1/2 1.9 2.4
13.00 (330.0)
11.00 (279.0) 5.40 (134.7)
Cat-3 with DM
1
Series E
RC304L-09
FRL
1/4
1/2
1.3
2.4
13.00 (330.0)
11.00 (279.0) 5.40 (134.7)
Cat-3 with DM
1
Series E
RC306L-09
FRL
3/8 1/2 1.9 2.4
13.00 (330.0)
11.00 (279.0) 5.40 (134.7)
Cat-4 with DM
2®
Series E
RC404-09
FR
1/4
1/2
1.3
2.4
13.00 (330.0)
11.00 (279.0) 5.40 (134.7)
Cat-4 with DM
2®
Series E
RC406-09
FR
3/8
1/2
1.9
2.4
13.00 (330.0)
11.00 (279.0) 5.40 (134.7)
Cat-4 with DM
2®
Series E
RC404L-09
FRL
1/4
1/2
1.3
2.4
13.00 (330.0)
11.00 (279.0) 5.40 (134.7)
Cat-4 with DM
2®
Series E
RC406L-09
FRL
3/8
1/2
1.9
2.4
13.00 (330.0) 11.00 (279.0) 5.40 (134.7)
* NPT port threads. Specify voltage and hertz when ordering. The standard Air Entry Packages are supplied with metal bowl and manual drain, for
auto drain insert an “A” before the dash (-) in the model number, e.g., RC208A-09.
Air Entry Packages with Control Reliable
Energy Isolation
Do not use in power press clutch/brake applications.
• Pre-engineered panel-mounted design with air entry via filter and regulator
“FR”, or filter, regulator, and lubricator “FRL”.
• .
Includes 3/2 Normally Closed Sensing Valve which senses poppet position
and state. Electrical feedback via DPST switch (Double-Pole Single-Throw).
• Applications include Air Dump and Trapped-Pressure Release.
Air Entry Packages with 3/2 Normally Closed
Sensing Valve
• Pre-engineered panel-mounted design with air entry via a filter and
regulator “FR”, or filter, regulator and lubricator “FRL”.
• Includes DM
2®
Series E Double Valve with Monitoring & Memory:
a) Self-contained dynamic monitoring system requires no further valve monitoring
controls,
b) Dynamic memory of abnormal function prevents unintentional reset with removal
of air or electricity.
• All necessary features for safety applications are included:
a) Electrical reset valve,
b) Status indicator switch for valve condition (ready-to-run) feedback.
• Pre-engineered panel-mounted design with air entry via a filter and
regulator “FR”, or filter, regulator and lubricator “FRL”.
• Includes DM
1
Series E Double Valve with Monitoring:
a) Self-contained dynamic monitoring system requires no further valve monitoring
controls,
b) Ready-to-run: If an abnormality clears itself upon the removal of electricity to both
solenoids, it will be ready-to-run again. It does not remember the abnormality & stay
in a locked-out state until intentionally reset. Therefore, cumulative abnormalities
may go undetected,
c) Status indicator switch for valve condition (ready-to-run) feedback.
Do not use in power press clutch/brake applications.
Modular L-O-X
®
3
4