Progressive International Electronics RLM 2 - Manual (Page 4)

RLM Systems Installation Guide Version 3.0 © November 2008
iv
REMOTE LINE MONITORING SYSTEMS
Purpose of This Document
This manual contains instructions for installation of the Remote Line Monitor systems used to
monitor transactions between dispensers and the consoles that control them.
Instructions for installing or servicing dispensers, consoles and tank monitors are not
included. For more detail on any product not manufactured by PIE, always refer to that
product’s accompanying documentation.
Notice
Progressive International Electronics reserves the right to revise and improve this document as
required. This publication details our Remote Line Monitors at this time, and may not
accurately describe these products at all times in the future. Specifications are subject to
change without notice.
Patents
Progressive International Products are manufactured or sold under one or more of the
following U.S. patents.
5, 790,410
5,831,861
5,694,326
5,663,887
5,557,529
5,394,336
5,361,216
5,270,943
5,108,742
Copyright
Copyright © 2006 Progressive International Electronics, Inc. All rights reserved. No part of
this publication may be reproduced, stored in a retrieval system or transmitted, in any form or
by any means, electronic, mechanical, photocopying, recording, or otherwise, without the
prior written permission of Progressive International Electronics, Inc.
All brands or product names are trademarks or registered trademarks of their respective
companies.