Maple Systems MAPware-7000 - Manual (Page 17)

MAPware-7000 Programming Manual 17
1010-1040, Rev. 02
Chapter 1 – Introduction
Welcome
Welcome to the Maple Systems’ HMC7000 Series Human Machine Controllers (HMCs). The
graphic HMC7000 is a combination operator-based HMI (human machine interface) with built-in
PLC (programmable logic controller) operation.
This is accomplished by using optional expansion I/O modules and configuration software that
supports ladder logic programming. Now you can have an HMI and a PLC in one unit. There are
several advantages:

Lower cost

Easier to use and maintain

Easier to program (only one software package to learn)

Faster response time since HMI and PLC are in one unit
The HMC7000 offers flexibility as well. Rather than using fixed I/O, the HMC7000 Series
employs expansion slots so that you can customize your I/O configuration. In addition, Maple
Systems offers a wide assortment of expansion modules including combination digital
input/output modules, digital input only, digital output only, analog modules, and high-speed
counter modules. The HMC7000 Series also has serial ports so if you have a favorite PLC that
you wish to use- no problem. The HMC7000 supports most major PLC manufacturer brands.
The HMC7000 Series products are industrial grade equipment. They are certified to meet the
European CE noise immunity/emission standards and they are UL listed for Class I Division 2
environments.
Please read this operation manual and visit www.maplesystems.com for the latest information
on these products.