Maple Systems MAPware-7000 - Manual (Page 19)

MAPware-7000 Programming Manual 19
1010-1040, Rev. 02

This HMC7000 Series Programming Manual (shipped with MAPware-7000 software as a
PDF file) describes the general operation and features of the HMC7000 Series using the
MAPware-7000 configuration software. The HMC7000 Series Installation Guide, Ladder
Logic Guide and I/O Module Guide are also included.

Controller Information Sheets – Important information specific to each supported
protocol when connecting to an external third party PLC.

MAPware-7000 Online Help – covers the operation of the MAPware-7000 programming
software. It is always available by clicking Help Topics from the Help menu in MAPware-
7000.

HMC7000 Quick Start Guide – describes general specifications and installation of the
HMC7000. It is included with every HMC7000 or available for download from our
website.
For more information, please visit the Support Center section on our website at
http://www.maplesystems.com/support.htm . The Support Center provides links to manuals,
FAQs, technical notes, training videos, sample projects, controller information sheets, and
controller cable diagrams.
Conventions
When using MAPware-7000, there are usually several ways to perform a task. For example, if
you want to copy a graphics object, you can:

click the Copy command on the Edit menu

click the Copy button on the Standard toolbar

press the CTRL+C keys on your computer
In most cases, we will describe each method when the task is introduced. The menu method is
then used whenever the task is used in later procedures. Other conventions used in this manual
are listed in the following table.
Convention Meaning
Bold Characters that you must type exactly as they appear. For example, if you are directed
to type a:\setup, you should type all the bold characters exactly as they are printed.
Italic Placeholders for information you must provide. For example, if you are directed to
type filename, you should type the actual name for a file instead of the word shown in
italic type. Italics are also used to indicate a glossary term.
ALL CAPITALS Directory names, files names, key names, and acronyms.
KEY1+KEY2 A plus sign (+) between key names means to press and hold down the first key while
you press the second key.