Maple Systems MAPware-7000 - Manual (Page 237)

MAPware-7000 Programming Manual 237
1010-1040, Rev. 02
o 1: offline operation, all occurring alarms are ignored (not displayed or entered
into the historical alarm memory area) until control is reset back to 0. Note: any
alarms that occurred while offline are displayed after control is reset back to 0.

Historical Alarm Count (SW0004 register, Read Only): represents the total number of
alarms currently listed in the Historical Alarm Memory.
Function Key Tasks

Key Specific Task - Acknowledge Alarm: performs same function as the Acknowledge
Alarm touchscreen button (see below).

Key Specific Task – Acknowledge All Alarms: performs same function as the
Acknowledge All alarms touchscreen button (see below).

Key Specific Task – Previous Alarm: performs same function as the Previous Alarm
touchscreen button (see below).

Key Specific Task – Next Alarm: performs same function as the Next Alarm touchscreen
button (see below).

Key Specific Task – Previous Historical Alarm: when pressed, this button detracts (move
all alarms down one line) the list of alarms displayed. This is similar to pressing the Up
Arrow on the Vertical Scroll bar when enabled. Note: only works with Alarm List object
that is configured as Alarm Type- Historical.

Key Specific Task – Next Historical Alarm: when pressed, this button advances (move all
alarms up one line) the list of alarms displayed. This is similar to pressing the Down
Arrow on the Vertical Scroll bar when enabled. Note: only works with Alarm List object
that is configured as Alarm Type- Historical.

Key Specific Task – Move to Latest Historical Alarm: this button moves to the last
(bottom) line of the list of alarms displayed, thereby showing the most recent (latest)
historical alarm. This is similar to pressing the Double Down Arrow on the Vertical Scroll
bar when enabled. Note: only works with Alarm List object that is configured as Alarm
Type – Historical.

Key Specific Task – Move to Oldest Historical Alarm: this button moves to the first (top)
line of the list of alarms displayed, thereby showing the oldest historical alarm. This is
similar to pressing the Double Up Arrow on the Vertical Scroll bar when enabled. Note:
only works with Alarm List object that is configured as Alarm Type – Historical.

Key Specific Task – Move to Latest Alarm: this button moves to the last (bottom) line of
the list of alarms displayed, thereby showing the most recent (latest) alarm. This is
similar to pressing the Double Down Arrow on the Vertical Scroll bar when enabled.
Note: only works with Alarm List object that is configured as Alarm Type – Real Time.

Key Specific Task – Move to Oldest Alarm: this button moves to the first (top) line of the
list of alarms displayed, thereby showing the oldest alarm. This is similar to pressing the
Double Up Arrow on the Vertical Scroll bar when enabled. Note: only works with Alarm
List object that is configured as Alarm Type – Real Time.

Key Specific Task – Clear Historical Alarm Memory: when pressed, this clears the
Historical Alarm memory of all past alarms entered.