Maple Systems MAPware-7000 - Manual (Page 232)

232 MAPware-7000 Programming Manual
1010-1040, Rev. 02
Below is an example of a historical alarm:
Note that the three alarm color options are not available for historical alarms; use the
background and text font color options. In this example, the following fields are shown; alarm
number, alarm text, on-time, off-time, and ack-time. For clarity, we have placed titles on the
top of the alarm list to help identify each field.
For this example, there is also an Advanced Bit button (Clr Alarms) that is configured with a Key
Specific Task to Clear Historical Alarm Memory. This button can be used to clear the alarm
memory and blank the display.
There is also a Numerical Data object (Alarm Count – SW0004) which shows how many alarm
messages are in memory. The other objects perform the same function as in our example of
using a real-time Alarm List above.
Historical alarms display only alarm messages that have been stored in non-volatile memory of
the HMC7000. Therefore, you cannot use the MAPware-7000 run time simulator to display a