Proface AGP3500 - 10.4 DIO HMI" - Manual (Page 5)

5
10. System Design
*1 For supported models, refer to Pro-face’s support site “Otasuke Pro!”
(http://www.pro-face.com/otasuke/).
You can connect to this site by clicking the GP-Pro EX’s [Help(H)] menu-[Connect to
Support Site “Otasuke Pro!” (C)] command.
*2 Up to 63 CANopen slaves can be connected to the CANopen Master Unit’s CANopen
I/F (master) with CANopen recommended transfer cables and connectors.
See ‘13.4 CANopen Communication Cable and Connectors” on page 11.
*3 When the CANopen Master Unit is used, the EX modules cannot be attached to the LT’s
back together.
CANopen
Master Unit
*3
LT Interface
(1) AUX Unit Interface/Expansion Unit (EXT2)
CANopen Master Unit Interface
(2) Extension Connector
(3) CANopen Interface
LT
IO Cable (Prepared by user)
Various types of I/O
equipment
Indicators, LEDs,
sensors, switches,
and so on
CANopen Slaves
(Commercial type)
*1, *2
IO Cable (Prepared by user)
Various types of I/O
equipment
Indicators, LEDs,
sensors, switches,
and so on
CANopen Slaves
(Commercial type)
*1, *2
(1)
(2)
(3)