Proface AGP3500 - 10.4 DIO HMI" - Manual (Page 9)

9
12.3 Structural Specifications
13. CANopen Specifications
13.1 CANopen Interface
Installation
Configuration
Connect the CANopen Master Unit directly to the rear side of the LT.
Cooling Method Natural air circulation
Weight Approx. 500g max.
External Dimensions
W 23.5mm [0.93in.] x H 90mm [3.54in.] x D 71mm [2.80in.]
(excluding projection and connector part)
Connector
(CANopen Master Unit side)
XM2C-0942-502L <OMRON Co.>
Recommended Cable Connector
(Cable side)
See ‘13.4 CANopen Communication Cable and
Connectors” on page 11.
Interfit Bracket #4-40 (UNC)
Pin Arrangement Signal Name Description
1 –
2 CAN_L CAN-L bus line
3 CAN_GND CAN ground
4 –
5 –
6 –
7 CAN_H CAN-H bus line
8 –
9 –
Shell FG
Frame Ground
(Common with SG)
6
(CANopen Master
Unit Side)
9
5
1