Proface APL3000B - Node Box PC - Manual (Page 6)

6
1. Internal switches of the control box
System Set Switch
Switch
Location
Switch Name
Compati-
ble I/F
Factory
Settings
Description
SW1 System Set Switch –
See
System
Set Switch
10-point DIP switch. For System Set
Switch and the factory settings
details, see
System Set Switch.
SW2
Serial Mode Select
Switch
COM1
All OFF
(RS-232C)
10-point DIP switch. Designates
COM1 communication settings. For
Serial Mode Select Switch details,
see
Serial Mode Select Switch.
SW3
CI(RI)/+5V
Changeover Switch
COM2 CI(RI) Changes # 9 pin (CI(RI) / +5V).
SW4
CI(RI)/+5V
Changeover Switch
COM1 CI(RI) Changes # 9 pin (CI(RI) / +5V).
Switch
No.
Description ON OFF
Factory
Settings
Notes
1 Internal setting Reserved Reserved OFF
Do not change.
(Factory setting)
2
Implements the
logical inversion
operation for
RAS output
Normal
Close Normal
Open
OFF
RAS output is a CLOSE state when the
switch and the system is ON. When the
Switch is OFF, it is the opposite. The
RAS Output keeps Normal OPEN
when the Soft OFF state occurs or the
power turns OFF.
3
Sets up an
enabled/disabled
state for the front
USB port execution
control function
*1
*1 The Setting up an enabled/Disabled state for USB port execution control function is available for
only Windows
®
2000 and Windows
®
XP. Make sure to disable the function of the setting when
other OS is used.
Enabled Disabled ON
The front USB port is available when
the switch is ON. It is unavailable when
the switch is OFF.
4
Internal setting Reserved Reserved
OFF
Do not change.
(Factory setting)
5 to 8 ON
9 to 10 OFF
1 10 1 10
SW4 SW1 SW2 SW3
OFF ON ON OFF Bottom face of the control box
(CI)RI
5V