Yokogawa Removable Chassis DX1000N - Manual (Page 11)

1-3
IM 04L41B01-17E
Using the Ethernet Interface
1
2
3
4
5
6
App
Index
Setting/Measurement Server
• This function can be used to set almost all of the settings that can be configured using
the front panel keys. However, you cannot turn the power on and off or configure the
following settings:
User registration *1 , the root password and authentication key of the password
management function *2 , the key lock password, the connection destination of the FTP
client function, SMTP authentication, and POP3 settings.
*1 Can be configured on DXs with the /AS1 option.
*2 /AS1 option
• The following types of data can be output.
• Measured, computed *3 , and external input *4 data.
• Files in the internal memory or files on the external storage medium.
• Setup information and status byte.
• A log of operation errors and communications.
• Alarm summary and message summary.
• Relay status information.
The measured, computed *3 , and external input *4 data can be output to a PC in
BINARY or ASCII format. Other types of data are output in ASCII format. For a
description of the data output format, see chapter 4.
*3 /M1 or /PM1 option
*4 DX2000 with /MC1 option
• For details on how to use this function, see section 1.12.
• The commands that can be used with this function are setting commands (see
sections 3.4 and 3.5), basic setting commands (see section 3.6), and output
commands (see sections 3.7 and 3.8).
• This function can be used when communicating via the Ethernet interface or the serial
interface (option).
• For information about the settings and operations for using this function through serial
commands, see chapter 2.
Application timeout
This function closes the connection with the PC if there is no data transfer for a
given time. For example, this function prevents a PC from being connected to the
DX indefinitely without transferring data and prohibiting other users from making new
connections for data transfer.
1.1 DX Features