Yokogawa Removable Chassis DX1000N - Manual (Page 142)

3-25
Commands
IM 04L41B01-17E
1
2
3
4
5
6
App
Index
3.4 Setting Commands
Query SL[p1[,p2]]?
Example Display trip line 1 in red at the 10% position of
group 1. Set the line width to 1.
SL1,1,ON,10,RED,1
Description • Set the position as percentages of the entire
amplitude axis in the waveform display area.
• If you are using the multi batch feature /BT2,
this command affects batch group 1.
• If you are using the multi batch feature /BT2
and batch group 1 is recording (memory
sampling), you cannot use this command.
• Set p1 by referring to the table in section 3.3.
NX Sets a display group (release
number 3 or later)
Syntax NX p1,p2,p3,p4,p5<terminator>
p1 Batch group number
Set the number to 1 if multi batch /BT2 is not
in use.
p2 Display group number
p3 Enable or disable (ON or OFF)
p4 Display group name (up to 16 characters)
p5 Channel configuration
Query NX[p1,[p2]]?
Example Assign channels 001, 003, 004 to 006 to batch
group 3’s group number 1 and name the group
GROUP2.
NX3,1,ON,GROUP2,001.003.004-006
Assign channels by using periods to separate
each channel or a hyphen to specify a range of
channels.
Description • For the characters that you can use for group
names, see appendix 3, “ASCII Character
Codes.” Note that you cannot use semicolons
or commas.
• If you are using the multi batch feature /BT2,
you cannot use this command on a batch
group that is recording (memory sampling).
• Set p1 and p2 by referring to the table in
section 3.3.
NL Sets a trip line (release number 3
or later)
Syntax NL p1,p2,p3,p4,p5,p6,p7<terminator>
p1 Batch group number
Set the number to 1 if multi batch /BT2 is not
in use.
p2 Display group number
p3 Trip line number (1 to 4)
p4 Trip line display (ON, OFF)
p5 Display position (0 to 100) [%]
p6 Display color (RED, GREEN, BLUE,
B.VIOLET, BROWN, ORANGE,
Y.GREEN, LIGHTBLUE, VIOLET, GRAY,
LIME, CYAN, DARKBLUE, YELLOW,
LIGHTGRAY, PURPLE, BLACK, PINK,
L.BROWN, L.GREEN, DARKGRAY, OLIVE,
DARKCYAN, S.GREEN)
p7 Line width (1, 2, 3)
Query NL[p1,[p2,[,p3]]]?
Example Display trip line 2 in red at the 10% position of
batch group 3’s display group 1. Set the line
width to 1.
NL3,1,2,ON,10,RED,1
Description • Set the position as percentages of the entire
amplitude axis in the waveform display area.
• If you are using the multi batch feature /BT2,
this command affects batch group 1.
• If you are using the multi batch feature /BT2,
you cannot use this command on a batch
group that is recording (memory sampling).
• Set p1 and p2 by referring to the table in
section 3.3.
SG Sets a message
Syntax SG p1,p2<terminator>
p1 Message number (1 to 100)
p2 Message (up to 32 characters)
Query SG[p1]?
Example Assign character string “MESSAGE1” to
message number 2.
SG2,MESSAGE1
Description For the characters that you can use for
messages, see appendix 3, “ASCII Character
Codes.” Note that you cannot use semicolons or
commas.
TH Sets the directory on the external
storage medium for saving data
Syntax TH p1<terminator>
p1 Directory name (up to 20 characters)
Query TH ?
Example Select the DATA1 folder on the external storage
medium for saving data.
THDATA1