Yokogawa Standalone MW100 - Manual (Page 118)

App-16
IM MW100-17E
logout Logout
Function Closes the maintenance/diagnostic session and closes currently used
TCP connections from the MW100 side.
Setting logout
Example logout
E0
Explanation After returning E0, the MW100 issues a close TCP/IP connection
request (FIN).
net Output Network Information
Function Outputs general network information related to the MW100
communication stack.
Setting net
Example net
EA
Network Statistics
TCP: connects = 1
TCP: closed = 0
TCP: timeoutdrop = 0
TCP: keepdrops = 0
TCP: sndtotal = 12
TCP: sndbyte = 25
TCP: sndrexmitpack = 0
TCP: sndrexmitbyte = 0
TCP: rcvtotal = 15
TCP: rcvbyte = 18
DLC: speed mode = 10 Mbps
DLC: duplex mode = half
DLC: link state = on
EN
Explanation Outputs general network information related to the MW100
communication stack in a form enclosed by EA and EN.
Appendix 6 Maintenance/Diagnostic Server