Index, Hardware requrements – Yokogawa DAQWORX User Manual

Page 10

Advertising
background image

1-3

IM WX1-07E

1

2

3

Index

Overv

ew

1.2 System Overvew

Hardware Requrements

The following hardware and software are required to use GateCONTROL.

• PC:

A PC that runs one of the OS above, and that meets the
following CPU and memory requirements.

When Usng Wndows 2000 or Wndows XP

Pentium 4, 1.6 GHz or faster Intel x64 or x86 processor;

512 MB or more of memory

When Usng Wndows Vsta

Pentium 4, 3 GHz or faster Intel x64 or x86 processor; 2 GB or

more of memory

When Usng Wndows 7

32-bit edition: Intel Pentium 4, 3 GHz or faster x64 or x86

processor; 2 GB or more of memory

64-bit edition: Intel x64 processor that is equivalent to Intel

Pentium 4, 3 GHz or faster; 2 GB or more of memory

• Free disk space:

200 MB or more

• Communication interface:

An Ethernet (when connecting to DAQLOGGER or Remote

Monitor) or RS-232 port that is recognized by the operating

system.

• CD-ROM drive:

Used to install the software.

• Peripheral devices:

A mouse supported by the operating system.

• Monitor:

A video card that is recommended for the OS and a display

that is supported by the OS, has a resolution of 1024×768 or

higher, and that can show 65,536 colors (16-bit, high color) or

more.

Note

An RS-232 to RS-485 converter is required to perform communications between the software

and another Modbus/RTU (RS-485) device (Yokogawa ML2 RS232C/RS485 converter

recommended).

Advertising