Yokogawa DAQWORX - Manual (Page 8)

1-1 IM WX1-07E
1
2
3
Index
Overv
ew
Chapter 1 Overvew
1.1 Overvew of GateCONTROL Functons
GateCONTROL is a software driver that acquires data from temperature controllers and
signal conditioners that support data input/output via the Modbus/RTU and Modbus/
TCP protocols, and in addition to transferring the data to Yokogawa's DAQLOGGER or
Remote Monitor software, can write output requests from AddObserver to temperature
controllers. Using GateCONTROL allows you to easily monitor data on DAQLOGGER
or Remote Monitor that is input for measurement on temperature controllers and signal
conditioners. Also, it is now possible to operate a controller from AddObserver through
GateCONTROL.
DAQLOGGER is application software for the PC that enables communication between
the PC and various types of recorders as well as monitoring of data logged by those
recorders. A direct connection can be made for communications between DAQLOGGER
and the µR1000/µR1800, VR, DARWIN, DX, MV, and CX recorders by Yokogawa.
Remote Monitor is application software that enables monitoring of data logged by
recorders or data logging software.
AddObserver is a software program that allows the user to create original screens for
displaying measured data, and for operating instruments.
Features
• Up to thirty-two temperature controllers and signal conditioners can be connected.
• The main registers of each instrument are automatically assigned as tag information
using the Automatic Model Determination function.
• Arbitrary registers can be registered as tags.