Ameriphone IIIP TTY - Manual (Page 16)

This feature notifies the user who was placed on
"HOLD" that the other party has resumed typing.
Press and
W simultaneously to acti-
vate this feature. The built-in signaler flashes
when an incoming signal is being detected from
the other party. Any keyboard activity cancels
Wait-For-Response feature or stops the flash-
ing.
CHAPTER 6
(CONTINUED)
J. Reviewing and Editing a Memo
ENTER PHONE NO.
A. Wait-For-Response
B. Call Transfer
CHAPTER 7
ADDITIONAL FEATURES
1. Turn on the TTY. Hold down and
press 2 to select memo function.
MEMO NAME> appears on the screen.
2. Type in the name of the memo.
3. Or press to scan the list of
memos in memory. Press
to scroll back, if necessary, until the de-
sired memo appears. Press to
select the memo.
4. If you only want to clear the memo, just
hold down and press
5 . Press Y
when CLEAR MEMO Y?N appears on the
screen. Otherwise use and
to scroll and review the memo.
5. If you want to modify the memo, use the
and to move the blinking cur-
sor to the location you want to edit. To
insert characters, just begin typing. If you
want to delete characters, press
6. If you continue scrolling through the memo
until it reaches the end,
END OF MEMO will be displayed. The next
screen asks whether or not to clear the
memo. Press Y to clear or N to save.
7. When finished, hold down and press
to return to the screen prior
to this function.
K. Printing a Memo or Conversation
Stored in Memory
1. With the TTY on, hold down and
Press 2 .
2. Type in the name or press to
scroll to the desired memo.
3. Press to select the memo.
4. Hold down and press P .
When directly connected to the phone line, you
can transfer a TTY call from one extension to
another. This feature is especially suited for
businesses with CENTREX telephone service
where each person has a single line telephone
with an extension number. Please note that the
actual transferring process is provided by the
telephone system.
1. Answer an incoming TTY call as you nor-
mally would.
2. Tell the incoming party to hold and that
you are going to transfer the call to
another extension.
3. Press and F simultaneously.
This will activate the call transfer feature
of the phone system.
4. DIALOGUE TTY displays
Dial the desired extension number on the
keyboard and press
.
5. When the transfer call is answered, to
bring the first party on the line, press
and F simultaneously.
HOOK SWITCH FLASH is displayed on the
screen.
6. You may stay on the line at this point for a
3-way conference call or you may hang up.
7. If you receive no answer or busy signal
from the second party, press
and
F simultaneously twice in succes-
sion to return to the first party.
14