Disconnecting from the transmission system, Good practice – MAHLE RTI ATX-2PS User Manual
Page 11
Page 10
GOOD PRACTICE
Empty used fluid tank after every exchange procedure.
DISCONNECTING FROM THE
TRANSMISSION SYSTEM
- Caution -
Hoses, fitting adapters and the engine may be extremely hot. Use
extreme caution when disconnecting.
1.
Turn vehicle engine off. READY light should go off. Make sure READY light is OFF before
proceeding.
2.
Disconnect ATX-2 from the vehicle battery.
3.
Disconnect 10 ft black and red hoses from the 12 inch adapter hoses.
4.
Disconnect 12 inch adapter hoses from fitting adapters connected to the transmission
system.
5.
Disconnect fitting adapters from the transmission system connection points.
6.
Reconnect cooler lines. Do not cross-thread cooler line fittings when reconnecting to the
transmission system.
7.
Start vehicle engine and check for leaks at cooler line connection points, tighten if necessary.
Vehicle transmission service is complete once transmission system is leak free.