PreSonus V-Fire - Manual (Page 14)

5 ROLAND VS SETTINGS
14
5 Roland Parameter Settings When Used With the V-Fire
Important: The instructions below are provided as specific steps to setup the Roland device to
work properly with the PreSonus V-Fire. Please refer to the Owner’s Manual of the specific
Roland device for a better understanding of the routing and clocking possibilities when used
with R-Bus devices, such as the V-Fire.
Note: In these examples, the Roland product will be set to clock to the V-Fire.
(i.e. slaved to the digital clock of the V-Fire)
However, digital clock could be set in the opposite direction by leaving the Roland on its
default selection of Internal clock, and setting the V-Fire digital clock to R-Bus1 or R-Bus2 in
the V-Fire software control panel.
5.1 Roland VS-2480CD/DVD, Using the Onboard LCD Screen
Digital Clock (Slave)
Press the Utility Button, and select “3 Project”
Turn the Master Clock setting to R-Bus1 or R-Bus2
[“Digital In Lock” will appear in the screen indicating that the Roland device is locked to the
V-Fire digital clock.]
Set the R-Bus2 Coaxial Select to “R-Bus-2-1/2, R-Bus-2-5/6”
Set the R-Bus2 Optical Select to “R-Bus-2-3/4, R-Bus-2-7/8”
Input to VS-2480
Press EZ ROUTING, and then press F1 for View.