PreSonus V-Fire - Manual (Page 24)

5 ROLAND VS SETTINGS
24
Output from VM Series
The Multi Outs feed audio signal to the V-Fire’s R-Bus inputs.
Each input channel on a VM-7000 series mixer can assign its audio signal to 1 or more Multi
Outs (R-Bus or Analog).
Usually, the default Patch bay setting would be the best option for use with the V-Fire
(Input channel 1 sending to Multi Out 1, Input channel 2 sending to Multi Out 2, etc.), but this
can easily be changed by the user.
To change channel routings to the Multi Outs…
Press the Multi Out 1-24 button.
Press the desired CH EDIT button of the MULTI OUT to be re-routed.
Turn the V1 Value knob to change the Source Select value of the appropriate input channel to
be routed to the chosen MULTI OUT destination.
The MULTI OUT level can be adjusted with the appropriate fader or the V2 Value knob.
For more advanced routing options and settings, please refer to the VM-7000 series Owner’s
Manual.