PreSonus V-Fire - Manual (Page 18)

5 ROLAND VS SETTINGS
18
Set the Master Clock to R-Bus.
[“Digital In Lock” will appear in the screen indicating that the Roland device is locked to the
V-Fire digital clock.]
Input to VS-2400CD
From the EZ ROUTING menu, press F1 for View.
In the Patch Bay section of the screen (top left), attach up to 8 input mixer channels to the 8
R-Bus inputs using the mouse.
Raise the appropriate input mixer channel faders to monitor the incoming audio signals.
Note: R-Bus is routed to Input Mixer channels 9-16 by default.
Output from VS-2400CD
From the EZ Routing menu, select Routing View.
In the Output Assign section of the screen (Top Right), turn Track Direct to ON.
Use the mouse to connect the R-Bus output pairs on the top of the screen with the Track
Numbers down the right side of the screen.
This will route individual VS-2400CD audio track outputs to the V-Fire inputs via R-Bus.
Alternatively,
Leave Track Direct OFF and connect the R-Bus output pairs on the top of the screen to Auxes,
Directs or Busses of your choice, using the TIME/VALUE wheel or mouse.