SABINE FBX-SOLO SL820 - Manual (Page 20)

20
PRODUCT SPECIFICATIONS
FILTERS
Eight independent digital notch filters controlled
automatically from 40 Hz to 20 KHz
Filter width: 1/10 octave, typical, or 1/5-oct.
selectable; constant "Q"
Filter depth: DSP controlled, variable to -50 dB
Resolution: 1/50th octave
Time required to find and eliminate feedback:
0.4 sec., typical @ 1 KHz
Total number of combined filters active: User
selectable, from 1-8
Number of Dynamic vs. Fixed filters: User
selectable
Last configuration stored in memory
INPUT/OUTPUT - SL820 ONLY
I/O Connectors: 1/4" TRS; tip = input, ring =
output, sleeve = ground
Input Impedance: Unbalanced >1 meg Ohm
Output Impedance: Unbalanced 10 Ohms
nominal; Maximum load 2K Ohms
Maximum Input/Output Level at lowest gain:
+20 dBV
Gain Range (with line out selected): 0 to +35 dB
(high in), +30 to +65 dB (low in)
Input to Output Gain @ unity setting: +/- 0.5 dBV
Bypass: Digital
INPUT/OUTPUT - SM820 ONLY
I/O Connectors: XLR-3 PIN 2 high Balanced
Input Impedance: 1K Ohm nominal
Output Impedance: Unbalanced 10 Ohms
nominal; Maximum load 2K Ohms
Maximum Input/Output Level at lowest gain: -10
dBV**
Gain Range: -15 to +20 dB (at high output)
Input to Output Gain @ unity setting: +/- 0.5 dBV
Bypass: Digital
EIN: -105 dBm @ 150 Ohms, 20 Hz - 20 KHz or
better
Phantom Power: 48V switch selectable