Stewart Audio CVA100-2 - Manual (Page 18)

18
All Stewart Audio products will ship from the factory as being
named Ultimo-<MAC>. This can be renamed within the device
configuration in the Dante Controller.
Transmitters are shown on the top of the matrix while Receivers are
shown on the left-hand side. The CVA100-2 includes 2 receive chan-
nels. In order to make a connection, click on the matrix node between
the appropriate transmitter and receiver. If a connection is successful,
it will display a green checkmark.
3.3.2 Dante FAQ
Q: I am having problems installing or using the Dante Controller Soft-
ware
A: Please refer to the official documentation available in the Audinate
portal where you downloaded the Controller Software.
Q: I do not see the CVA100-2 showing up on the network?
A: All Stewart Audio products are tagged as Ultimo-<MAC_ADDRESS>
from the factory. You can find the correct Ultimo device by choosing
the correct MAC address from the list. You can rename this using the
device configuration.