Wlv-1004 – Brocade Network OS Message Reference v4.1.1 User Manual
Page 469
Network OS Message Reference
453
53-1003227-01
WLV-1004
8
WLV-1004
Message
Port <port number> faulted due to excessive Symbol Errors. Check the SFP/QSFP
transceiver/cable and issue shutdown/no shutdown commands to recover.
Message Type
LOG
Severity
ERROR
Probable Cause
Indicates a deteriorated small form-factor pluggable (SFP) transceiver or quad small form-factor
pluggable (QSFP), an incompatible SFP or QSFP transceiver pair, or a faulty cable between the peer
ports.
Recommended
Action
Verify that compatible SFP or QSFP transceivers are used on the peer ports, the SFP or QSFP
transceivers have not deteriorated, and the cable is not faulty. Replace the SFP or QSFP transceivers or
the cable, if necessary. Execute the shutdown and no shutdown commands to restart the link-up
process.