Brocade Universal Four Post Rack Kit Installation Procedure (Supporting VDX 6740T) - Manual (Page 19)

Universal Four-Post Rack Kit Installation Procedure 19 of 20
53-1002944-01 Rev.B
Attaching the rear brackets to the front rack posts
Complete the following steps to attach the rear brackets to the front rack posts.
1. Attach the right rear bracket to the right front rack post using two 10-32 x 5/8-in. screws and two retainer nuts,
as shown in Figure 13 . Use the upper and lower holes in the bracket.
2. Attach the left rear bracket to the left front rack post using two 10-32 x 5/8-in. screws and two retainer nuts.
Use the upper and lower holes in the bracket.
3. Tighten all the 10-32 x 5/8-in. screws to a torque of 25 in-lbs (29 cm-kgs).
FIGURE 13 Attaching the rear brackets to the front rack posts
1 Screws, 10-32 x 5/8-in., panhead Phillips 2 Retainer nuts, 10-32