Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 229)

Unified IP MIB Reference 203
53-1003106-01
Switch port information
8
snSwIfStatsRxColliFrame
s
brcdIp.1.1.3.3.5.1.35
Syntax: Counter32
NOTE: This object is
supported on the
Brocade MLXe,
Brocade NetIron
MLX, Brocade
NetIron XMR,
Brocade NetIron
CES, Brocade
NetIron CER
series devices.
Read-only Shows the number of successfully received frames on a particular
interface for which transmission is inhibited by more than one collision.
snSwIfStatsFrameTooLon
gs
brcdIp.1.1.3.3.5.1.36
Syntax: Counter32
NOTE: This object is
supported on the
Brocade MLXe,
Brocade NetIron
MLX, Brocade
NetIron XMR,
Brocade NetIron
CES, Brocade
NetIron CER
series devices.
Read-only Shows the number of dot3StatsFrameTooLongs, which consists of
frames received on a particular interface that exceed the maximum
permitted frame size.
The count represented by an instance of this object is incremented when
the frameTooLong status is returned by the MAC service to the LLC (or
other MAC user). According to the conventions of IEEE 802.3 Layer
Management, received frames for which multiple error conditions are
obtained are counted exclusively according to the error status presented
to the LLC.
snSwIfStatsFrameTooSh
orts
brcdIp.1.1.3.3.5.1.37
Syntax: Counter32
NOTE: This object is
supported on the
Brocade MLXe,
Brocade NetIron
MLX, Brocade
NetIron XMR,
Brocade NetIron
CES, Brocade
NetIron CER
series devices.
Read-only Shows the number frames received on a particular interface that are
below the minimum permitted frame size.
Name, OID, and syntax Access Description