Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 692)

666 Unified IP MIB Reference
53-1003106-01
Real server port history control group table
65
Real server port history control group table
The real server port history control group table lists all the controls for collecting data samples for a
real server port.
snL4RealServerHistoryIntervalSta
rt
brcdIp.1.1.4.28.2.1.3
Syntax: Time ticks Read-only The value of sysUpTime at the start of the interval used to
measure data samples.
If the probe keeps track of the time of day, set the data
sampling to start at the beginning of the next hour.
NOTE: Following this rule may require the probe to delay the
collection of the first sample for an entry, because each
sample must be of the same interval. Also, data for the
sample that is currently being collected is not accessible
in this table until the end of its interval.
snL4RealServerHistoryReceivePk
ts
brcdIp.1.1.4.28.2.1.4
Syntax: Counter Read-only Shows the number of packets the ServerIron has received from
the real server.
snL4RealServerHistoryTransmitP
kts
brcdIp.1.1.4.28.2.1.5
Syntax: Counter Read-only Shows the number of packets the ServerIron has sent to the
real server.
snL4RealServerHistoryTotalConn
ections
brcdIp.1.1.4.28.2.1.6
Syntax: Counter Read-only Shows the total number of client connections on the real server.
A connection consists of two sessions: the client-to-server
session and the server-to-client session.
snL4RealServerHistoryCurConnec
tions
brcdIp.1.1.4.28.2.1.7
Syntax: Integer Read-only Shows the number of client connections currently on the real
server. A connection consists of two sessions: the
client-to-server session and the server-to-client session.
snL4RealServerHistoryPeakConn
ections
brcdIp.1.1.4.28.2.1.8
Syntax: Integer Read-only Shows the highest number of client connections on the real
server. A connection consists of two sessions: the
client-to-server session and the server-to-client session.
snL4RealServerHistoryReassign
ments
brcdIp.1.1.4.28.2.1.9
Syntax: Integer Read-only Shows the number of times the ServerIron has reassigned the
connection to another real server in the rotation because the
real server that is in use has not responded to two TCP SYN
requests from the client.
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
snL4RealServerPortHistoryContro
lTable
brcdIp.1.1.4.28.3 None Real server port history control table.
snL4RealServerPortHistoryContro
lIndex
brcdIp.1.1.4.28.3.1.1
Syntax: Integer Read-only An index that uniquely identifies an entry in this table. Each
entry defines a set of samples at a particular interval for a real
server port on the ServerIron.
Valid values: Up to 65535 entries.