Brocade Unified IP MIB Reference (Supporting FastIron Releases 07.5.00 and 08.0.10) - Manual (Page 424)

398 Unified IP MIB Reference
53-1003106-01
IPv4 ACL table
40
IPv4 ACL table
The IPv4 ACL table contains the access control lists (ACLs) defined for the device. The
snAgAclGblCurRowIndex object determines the number of ACLs that can be added to this table.
Use the following table to create IPv6 ACLs on FastIron IPv6 devices. Apply the ACLs to interfaces
using snAgAclBindToPortTable.
NOTE
The following table is not supported on the Brocade NetIron MLX, Brocade MLXe, Brocade NetIron
XMR, Brocade NetIron CES, and Brocade NetIron CER series devices.
snAgAclGblIfIPv6AcctClear
brcdIp.1.2.2.15.1.4
Syntax: InterfaceIndexOrZero
NOTE: This object is not
supported on the Brocade
NetIron CES and Brocade
NetIron CER series
devices.
Read-write Clears the IPv6 ACL accounting information of a particular
interface. The value “0” clears IPv6 ACL accounting
information on all the interfaces. Returns the value 0 for
SNMP GET and GET-NEXT requests.
snAgAclGblRebindAclNumber
brcdIp.1.2.2.15.1.5
Syntax: AclNumber Read-write Specifies the valid ACL number for a rebind. Returns the
value 0 for SNMP GET and GET-NEXT requests.
snAgAclGblRebindAclName
brcdIp.1.2.2.15.1.6
Syntax: DisplayString Read-write Specifies the ACL name for a rebind. Returns a null string
for SNMP GET and GET-NEXT requests. Maximum 255
characters are allowed.
brcdPbrAclAccntFilterAclName
brcdIp.1.2.2.15.1.7
Syntax: DisplayString Read-write Used to control the content of brcdPbrAclAccntTable. Any
ACL filter that has a full or partial match with ACL name
will not be returned in the brcdPbrAclAccntTable. The
default value is null and all ACL filters will be returned by
the table, if not specified.
brcdPbrAclAccntCounterType
brcdIp.1.2.2.15.1.8
Syntax: Integer Read-write This object is used to control the counter value of the
brcdPbrAclAccntAclInfo object in brcdPbrAclAccntTable. It
specifies the statistics to query.
•
cumulative(1) - default
•
last5min(2)
Name, OID, and syntax Access Description
Name, OID, and syntax Access Description
snAgAclTable
brcdIp.1.2.2.15.2 None Access control list table.
snAgAclIndex
brcdIp.1.2.2.15.2.1.1
Syntax: Integer32 Read-only Shows the index for an ACL entry that is associated with
this ACL.
This number must be unique among all the entries, even
though the value of other objects for an entry may be the
same as those of another entry.
snAgAclNumber
brcdIp.1.2.2.15.2.1.2
Syntax: AclNumber Read-write The access control list number for an entry:
•
1 to 99 – Standard access list
•
100 to 199 – Extended access list