Brocade ICX 6450-C Compact Switch Hardware Installation Guide - Manual (Page 22)

Installation tasks (Continued) TABLE 8
Task number Task Where to find more information
2 Unpack the device and all included accessories, “ Items included with an ICX
device” section
3 Install the device on a desktop, in an equipment rack, on a
wall, or on a metal surface. “Installing the device” section
4 Once the device is installed, plug the device into a nearby
power source that adheres to the regulatory requirements
outlined in this manual. “Powering on the system” section
Installation precautions
Follow all precautions when installing a device.
General precautions
DANGER
All fiber-optic interfaces use Class 1 lasers.
CAUTION
Do not install the device in an environment where the operating ambient temperature might
exceed 40 ο C (104 ο F).
CAUTION
Make sure the airflow around the front, sides, and back of the device is not restricted.
CAUTION
Never leave tools inside the device.
Lifting precautions
DANGER
Make sure the rack or cabinet housing the device is adequately secured to prevent it from
becoming unstable or falling over.
Installation precautions
20 Brocade ICX 6450-C Compact Switch Hardware Installation Guide
53-1003081-01