Brocade Mobility RFS9510 Controller Installation Guide - Manual (Page 15)

Brocade Mobility RFS9510 Controller Installation Guide 11
53-1002918-01
Hardware installation
3
Applying power to the controller
1. Gently press the power button to apply power to the controller.
2. Attach the front bezel between the rack mount brackets on the sides of the controller.
3. Lock the front bezel.
NOTE
Keep the front bezel keys in a secure location only accessed by authorized personnel.
Mobility RFS9510 Controller PCIe expansion and NIC cards
The Mobility RFS9510 Controller supports two 10GBe Peripheral Component Interconnect
Express (PCIe) cards and a hardware cryptography engine for superior encryption/decryption
performance.
CAUTION
The 10GBe NICs use a Class 1M laser module. Viewing the laser output with certain optical
instruments designed for use at a distance (for example, telescopes and binoculars) may pose an
eye hazard.