Switch status (primary system) – Brocade Mobility RFS7000 Controller Installation Guide User Manual
Page 16
System status LEDs
3
8
Brocade Mobility RFS7000 Controller Installation Guide
53-1001574-03
Start up / post (primary system or redundant system)
NOTE
During switch start up, the Temperature status LED will be lit Solid Amber. This is
normal behavior and does not indicate an error. At the completion of start up the
Temperature Status LED will switch to Solid Green.
Switch status (primary system)
System status 1 LED
System status 2 LED
Event
Off
Off
Power off
Green blinking
Green Blinking
Power On Self Test (POST) running
Green solid
Green Blinking
POST succeeded (Operating System
Loading)
Green solid
Off
POST succeeded (Normal Operation)
Amber blinking
Off
POST Failure
Alternating green blinking
& amber blinking
Alternating Green Blinking
& Amber Blinking
Boot Up Error: Device has an invalid
checksum
System status 1 LED
System status 2 LED
Event
Off
Off
Power off
Green solid
Off
No Redundancy Feature Enabled
Green solid
Green solid
Redundancy Feature Enabled
Actively Adopting Access Points
Green solid
Amber blinking
No License to adopt Access Points or No
Country Code configured on the switch.