Brocade Mobility RFS7000 Controller Installation Guide - Manual (Page 28)

Installing a compact flash card
4
20 Brocade Mobility RFS7000 Controller Installation Guide
53-1001574-03
NOTE
The switch supports USB flash devices formatted with FAT or VFAT (FAT32)
filesystems only. If your flash storage device is formatted with another
filesystem you will need to format
Installing a compact flash card
The Mobility RFS7000 Controller contains a Compact Flash slot for file transfers,
firmware updates and use by Brocade service technicians. Follow the setup
instructions below to connect a Compact Flash Card to the switch and then access
that card through the Web UI.
1. To use a Compact Flash card with the Mobility RFS7000 Controller insert the
card into the Compact Flash slot.
2. Once the Compact Flash card has been inserted, follow the instructions in the
Mobility RFS7000 Controller System Reference Guide or Mobility RFS7000
Controller CLI reference to use the Compact Flash card for file transfers or
firmware updates.
Compact
Flash slot
Compact Flash