Brocade Mobility RFS7000 Controller Installation Guide - Manual (Page 31)

Supplying power to the Mobility RFS7000 Controller
4
Brocade Mobility RFS7000 Controller Installation Guide 23
53-1001574-03
Supplying power to the Mobility RFS7000 Controller
1. Plug an approved AC power cord into the power connector at the back of the
Mobility RFS7000 Controller.
2. Plug the cord into a standard AC outlet with a voltage range of 100 to 240 VAC.
CAUTION
An improper shutdown can render the Mobility RFS7000 Controller
inoperable such that it could require service by Brocade Support. Do
not remove AC power without first following the shutdown procedure.
An abrupt loss of power can corrupt the information stored on the
device.
sym_0
Rack mount
bracket
AC inlet