Displaying the policy used for hosts – Brocade Virtual ADX Global Server Load Balancing Guide (Supporting ADX v03.1.00) User Manual
Page 104
94
Brocade Virtual ADX Global Server Load Balancing Guide
53-1003245-01
Host-level policies for site selection
1
Displaying the policy used for hosts
To view which GSLB policy is being used for hosts, enter the following command.
The output above shows that host policy “test” is in use for host “www” of zone “example12.com”
and the global GSLB policy is in use for host “www” of zone “example13.com”.
Syntax: show gslb dns detail
Virtual ADX#show gslb dns detail
ZONE: example12.com
HOST: www:
(GSLB policy: test)
Flashback DNS resp.
delay selection
(x100us) counters
TCP APP Count (%)
* 10.1.1.101: dns v-ip ACTIVE N-AM 0 0 1 (100%)
* 10.1.1.22: dns real-ip ACTIVE N-AM 22 16 0 (0%)
* 10.10.10.200: dns real-ip DOWN N-AM -- -- 0 (0%)
* 10.1.1.76: dns v-ip DOWN N-AM -- -- 0 (0%)
ZONE: example13.com
HOST: www:
(Global GSLB policy)
Flashback DNS resp.
delay selection
(x100us) counters
TCP APP Count (%)
* 10.1.1.102: dns v-ip ACTIVE N-AM 0 0 1 (100%)