Syslog messages – Brocade Virtual ADX Global Server Load Balancing Guide (Supporting ADX v03.1.00) User Manual

Page 136

Advertising
background image

126

Brocade Virtual ADX Global Server Load Balancing Guide

53-1003245-01

SNMP traps and Syslog messages

1

Syslog messages

By default, the ADX device’s Syslog buffer is enabled and contains up to 50 entries. To display the
GSLB and other Syslog messages, enter the following command at any level of the CLI.

Syntax: show logging

In this example, the GSLB messages are shown in bold type. The GSLB messages in this example
all apply to the ADX devices at the Sunnyvale site. Three types of messages are shown:

The first two GSLB messages are shown nearest the bottom, since new messages appear at
the top. These two messages indicate that the GSLB ADX device has established a GSLB
protocol connection to the site ADX devices (slb-1 at 10.157.22.209 and slb-2 at
10.157.22.210).

The next two GSLB messages indicate that the Layer 4 health checks for TCP port 80 were
completed successfully. For sites with other applications, the ADX device sends separate Layer
4 TCP or UDP health checks for each of those applications.

The final two GSLB messages in this example (the ones nearest the top of the log) indicate that
the site ADX devices responded to the Layer 3 health check (IP ping).

Virtual ADX> show logging

Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns)

Buffer logging: level ACDMEINW, 16 messages logged

level code: A=alert C=critical D=debugging M=emergency E=error

I=informational N=notification W=warning

Dynamic Log Buffer (50 entries):

00d00h01m28s:N:L4 gslb health-check 10.157.22.210 of brocade.com status changed

to up

00d00h01m28s:N:L4 gslb health-check 10.157.22.209 of brocade.com status changed

to up

00d00h01m01s:I:Interface ethernet16, state up

00d00h01m01s:I:Interface ethernet2, state up

00d00h00m34s:N:L4 gslb health-check 10.157.22.210 of brocade.com port 80 is up

00d00h00m32s:N:L4 gslb health-check 10.157.22.209 of brocade.com port 80 is up

00d00h00m32s:N:L4 server 10.157.23.59 kandrew TCP port 80 is up

00d00h00m32s:N:L4 server 10.157.23.59 kandrew is up

00d00h00m31s:N:L4 gslb connection to site sunnyvale SI 10.157.22.210 slb-2 is up

00d00h00m31s:N:L4 gslb connection to site sunnyvale SI 10.157.22.209 slb-1 is up

00d00h00m31s:I:Bridge topology change, vlan 1, interface 16, changed state to

forwarding

00d00h00m07s:N:L4 server 10.157.23.130 dns-ivy TCP port 53 is up

00d00h00m07s:N:L4 server 10.157.23.130 dns-ivy is up

00d00h00m06s:I:Bridge topology change, vlan 1, interface 2, changed state to

forwarding

00d00h00m03s:I:Bridge root changed, vlan 1, new root ID 800000e0520002d1, root

interface 16

00d00h00m00s:I:Warm start

Advertising