Burcam F80210 ELECTRONIC HOUSE FANAIR - Manual (Page 9)

9
INSTALLATION GUIDE FOR THE BURCAM’S Fan Air
MODEL F80210
Remove the fan cover to access the elbow.
Remove the relative humidity
sensor cover.
Remove the screw which
fixes the elbow to its support.
Remove the screw which
fixes the elbow to its support,
to the opposite side. You
can now remove the elbow.
Be careful for sharp edges,
rotate the elbow to align the rivets to the same
area and obtain a straight position.
Using the screws, re-install
the pipe to the support,
aligning the relative humidity sensor opening
towards the control panel. Then replace the sen-
sor into its location.
STEP 2
STEP 3
STEP 4
STEP 5
STEP 6
STEP 7
2
3
4
5
6
7