Rice Lake Condec UMC600 - Manual (Page 38)

Options Configuration 35
4.7.2 Macro File Setup
There may be times when you need to print more than the 30 character codes that are allowed in the custom transmit
files (7.1 - 7.8). To do custom transmits larger than 30 character codes, the UMC600 provides eight “macro” files
(7.9 to 7.16) that can be called in from the custom transmit files. This is done by putting a parameter code of 600,
601, 602, 603, 604, 605, 606, or 607 in your custom transmit file to macros 7.9 through 7.16 respectively. As with
the custom transmit files, each macro file can contain up to 30 character codes. You can call more than one macro in
your custom transmit or even call the same macro more than once.
Each macro file holds up to 30 ASCII characters and parameter codes. Refer to the ASCII characters and Table 9-2
in Section 9 for parameter codes.
Table 4-11. Print File Definition Codes
Table 4-12. Code 600 Definitions
Table 4-13. Code 601 Definitions
Print File 7.1 – Port 1 gross mode data
Line # Code Code definition
01 002 STX start of text
02 600 * macro file #1 (7.9)
03 200 gross weight with lb/kg gr
04 032 SP (space)
05 601 * macro file #2 (7.10)
06 013 CR (carriage return)
07 010 LF (line feed)
08 999 end of file
Code 600 – macro file 7.9
Line # Code Code definition
01 065 A character
02 067 C character
03 032 SP (space)
04 105 i character
05 110 n character
06 099 c character
07 046 . (period)
08 013 CR (carriage return)
09 010 LF (line feed)
10 999 end of file
Code 601 – macro file 7.10
Line # Code Code definition
01 402 date per setup
02 032 SP (space)
03 401 time per setup
04 999 end of file