Rice Lake Condec UMC600 - Manual (Page 34)

Options Configuration 31
Figure 4-10. Option 5 Menu
Table 4-8. Table of Commands and Data
Refer to Section 4.12.3 on page 46 for individual serial command option parameters for Option 5.
XXXXXXX XXXXXXX XXXXXXX XXXXXXX OPTION 5 OPTION 4 OPTION 3 OPTION 2 CALIBR CONFIG OPTION 6 OPTION 7 OPTION 8 OPTION 10 OPTION 1 OPTION 9
OFF ON
tAg
5.1 5.2 5.3 5.4
LAn
Addr oFF
On
oFF
On
5.5
Cnt
OPTION 11
Receive From Indicator Transmit From Indicator
Data Entry Command Type Echo Data Resp.
Poll P Wt. Poll P Weight data
Remote Z Zero Z Status
G Gross G Status
N Net N Status
T Tare T Status
B Start Bat B Status
Setpoint
( xxxxx ) SEn Enter SRn Setpoint value
SRn Recall SRn Setpoint value
Fixed Tare
( xxxxx ) FE Enter FR Fixed tare value
FR Recall FR Fixed tare value
Calibration
( xxxxx )
Z Zero Cal No response
SE Span Cal
Calibration Data
Zero Cal CZE Zero Entry CZR Zero Cal Data
CZR Zero Recall CZR Zero Cal Data
Span Cal CSE Span Entry CSR Span Cal Data
CSR Span Recall CSR Span Cal Data