Elitegroup MS300 (V1.0) - Manual (Page 21)

15
Using BIOS
Network Boot Protocol (PXE)
This item shows the information of the network boot protocol.
Boot Order (Int 18h)
This item shows the information of the boot order.
Onboard LAN Controller (Enabled)
Use this item to enable or disable the Onboard LAN.
The LAN Configuration will be different depending on the settings of
Operating system select and Launch PXE OpROM in the Boot menu.
When the Operating system select item is Windows 7 or other OS and the
Launch PXE OpROM item is Enabled, the above screen will appear.
Main Advanced Chipset Freq/Vol Control Boot Security Exit
Enable/Disable Onboard
LAN 1 Controller LAN Configuration
Onboard LAN Controller Enabled
Ipv4 PXE Support Enabled
Ipv6 PXE Support Enabled
Ipv4/6 PXE Support (Enabled)
Use these items to enable Ipv4/6 PXE Boot Support. If disabled Ipv4/6 PXE, boot
option will not be created.
Onboard LAN Controller (Enabled)
Use this item to enable or disable the Onboard LAN.
+/- : Change Opt.
Enter/Dbl Click : Select


: Select Screen
/Click: Select Item
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
The LAN Configuration will be different depending on the settings of
Operating system select and Launch PXE OpROM in the Boot menu.
When the Operating system select item is Windows 8 and the Launch
PXE OpROM item is Enabled, the above screen will appear.
Press <Esc> to return to the Advanced Menu page.