Elitegroup MS300 (V1.0) - Manual (Page 26)

20
Using BIOS
     SATA Configuration
Use this item to show the mode of serial SATA configuration options.
SATA Port1~2 (Not Present)
This motherboard supports two SATA channels and each channel allows one SATA
device to be installed. Use these items to configure each device on the SATA channel,
and each channel allows one SATA device to be installed. Use these items to configure
each device on the SATA channel.
Press <Esc> to return to the Advanced Menu page.
Intel Virtualization Technology (Enabled)
When enabled, a VMM can utilize the additional hardware capabilities provided by
Vandor Pool Technology.
CPU C3 Report (Disabled)
This item is used to enable or disable CPU C3 (ACPI C2) report to OS.
Excute Disable Bit (Enabled)
This item allows the processor to classify areas in memory by where application code
can execute and where it cannot. When a malicious worm attempts to insert code in
the buffer, the processor disables code execution, preventing damage or worm propa-
gation. Replacing older computers with Execute Disable Bit enabled systems can halt
worm attacks, reducing the need for virus related repair.
SATA Mode (IDE Mode)
Use this item to select SATA mode.
CPU C6 Report (Disabled)
This item is used to enable or disable CPU C6 (ACPI C3) report to OS.
Press <Esc> to return to the Advanced Menu page.
Enhanced Halt (C1E) (Enabled)
This item enables or disables enhanced halt.
Main Advanced Chipset Freq/Volt Control Boot Security Exit
+/- : Change Opt.
Enter/Dbl Click : Select


: Select Screen
/Click: Select Item
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Determines how SATA
controller(s) operate. SATA Configuration
SATA Mode IDE Mode
SATA Port1 Not Present
SATA Port2 Not Present