Elitegroup MS300 (V1.0) - Manual (Page 39)

33
Using BIOS
This page enables you to set setup administrator password and user password.
Security Menu
Administrator Password Status (Not Installed)
This item shows adiministrator password installed or not.
User Password Status (Not Installed)
This item shows user password installed or not.
Main Advanced Chipset Freq/Volt Control Boot Security Exit
+/- : Change Opt.
Enter/Dbl Click : Select


: Select Screen
/Click: Select Item
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Administrator Password Status Not Install
User Password Status Not Install
Administrator Password
System Mode state Setup
Secure Boot state Disabled
Secure Boot Enabled
Secure Boot Mode Custom
Image Execution Policy
Key Management
Secure Boot mode selector.
‘Standard’ -fixed Secure
boot policy, ‘Custom’ -
changeable Image
Execution policy and Secure
Boot Key databases
System Mode state (Setup)
This item shows system mode setup or not.
Secure Boot state (Disabled)
This item allows you to enable or disable the secure boot state.
Secure Boot (Enabled)
This item is used to control the secure boot flow, it is possible only if system runs in
User Mode.
Secure Boot Mode (Custom)
This item is used to select secure boot mode, when you select standard mode, secure
boot policy is fixed; when you select custom mode, the image execution policy and
secure boot key databases are changeable.