Elitegroup MS300 (V1.0) - Manual (Page 33)

27
Using BIOS
This page enables you to set the clock speed and system bus for your system. The
clock speed and system bus are determined by the kind of processor you have
installed in your system.
Freq/Volt Control Menu
 CPU Advanced Configuration
Scroll to this item and press <Enter> to view the following screen.
CPU Frequency (1/100 MHz) (10000)
This item shows the information of the CPU frequency.
CPU Ratio (22)
This item allows users to control non turbo CPU ratio.
Enhanced Intel SpeedStep Technology (Enabled)
This item allows users to enable or disable the EIST (Enhanced Intel SpeedStep
Technology).
Turbo Mode (Enabled)
This item allows you to control the Intel Turbo Boost Technology.
Main Advanced Chipset Freq/Volt Control Boot Security Exit
+/- : Change Opt.
Enter/Dbl Click : Select


: Select Screen
/Click: Select Item
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
CPU Advanced
Configuration Frequency/Voltage Control
CPU Advanced Configuration
Chipset Advanced Configuration
Auto Detect DIMM/PCI Clk Enabled
Spread Spectrum Enabled
Genuine Intel(R) CPU @ 2.20GHz
Processor Speed
2200 MHz
Memory Frequency 1333 MHz
Total Memory 2048 MB (DDR3)
Main Advanced Chipset Freq/Volt Control Boot Security Exit
+/- : Change Opt.
Enter/Dbl Click : Select


: Select Screen
/Click: Select Item
F1: General Help
F2: Previous Values
F3: Optimized Defaults
F4: Save & Exit
ESC/Right Click: Exit
Enhanced Intel SpeedStep
Technology CPU OverClocking Configuration
CPU Frequency(1/100 MHz) 10000
CPU Ratio 22
Enhanced Intel SpeedStep Technology Enabled
Turbo Mode Enabled
Runtime Turbo Enable Disabled
Intel Graphics Configuration
Graphics Core Ratio Limit 18
Graphics Voltage (1/256) 0