Hired-Hand RollSeal Rollup Curtains: ROLLUP CURTAIN SYSTEM Rev 12-07 - Manual (Page 15)

Part No. 4801-5169 Rev 12-07 Rollup Curtain System Page 15
5 ft.
(152 cm)
6.7 Installing Bottom Drive Pipe into Curtains
NOTE: Bottom pipe serves as drive pipe to attach motor drive.
1. Insert 1.9" (4.83 cm) O. D. pipe into bottom hem of curtains. Insert pipe into curtains for the entire length
of the system.
2. Fit fabric clips onto the bottom 1.9" (4.83 cm) pipe/curtain assembly. Install clips every 5 ft. (152.4 cm)
3. If installing a double stack system, repeat steps above to install second drive pipe into hem of top curtain.
NOTE: Drive Pipe/Curtain should end 12" (30.48 cm) from Drive Cabinet. See Section 7.
Figure 6
Bottom Rod & Fabric Clips
1.9" (4.83 cm) O.D.
GS Rod
See Parts list.
1.9" (4.83 cm)
O. D. GS Pipe
Bottom Hem
Of Curtain