Warning – Hired-Hand RollSeal Rollup Curtains: ROLLUP CURTAIN SYSTEM Rev 12-07 User Manual
Page 4
Part No. 4801-5169 Rev 12-07
Rollup Curtain System
Page 4
2. Warnings
Warning!
Electrical Wiring To The PowerTrak Should Be At Least 14 Gauge. All Wiring Should Be In
Accordance With National Electrical Code Or Other Local Codes.
Warning!
High Voltage Is Present Inside The Machine.
Disconnect Electrical Power Before Reaching Inside Machine
Warning!
Disconnect All Power Sources Before Installing This Equipment. Failure To Disconnect Power Source
Can Result In Property Damage, Serious Injury Or Death!
Warning!
Dangerous Rotating Machinery!
Keep Hands, Clothing, Etc. Clear When Operating!
Do Not Operate Without All Guards And Covers In Place!
Warning!
The Installer Is Responsible For Complying With All Relevant Regulations, Such As National Wiring
Regulations An Accident Prevention Regulations. Particular Attention Must Be Given To The Cross-
sectional Areas Of Conductors, The Selection Of Fuses Or Other Protection, And Protective
Earth/Ground Connections!
!
!
!
!
!