Aiwa HV-FX8100U - Manual (Page 13)

ENGLISH
UHF/VHF
IN (ANT)
OUT (TV)
OUT IN
Connect the cable from the CATV system to the 2-way splitter.
Connect one of the output connector of the splitter to the input
connector of the CATV converter, and the other to the A/B switch.
Connect the output connectors on the converter to the UHF/VHF IN
(ANT) connector on this VCR.
Connect the UHF/VHF OUT (TV) connector on this VCR to the A/B
switch using the supplied antenna cable.
Connect the A/B switch to the antenna connector on your TV.
Connect the AC cord to the AC outlet.
1
2
4
3
5
6
CATV system
2-way splitter
(not supplied)
CATV converter
1
2
3
75-ohm coaxial cable
(not supplied)
2
75-ohm coaxial cable (not supplied)
To AC outlet
6
75-ohm coaxial cable (not supplied)
Antenna cable
(supplied)
4
A/B switch
(not supplied)
75-ohm coaxial cable (not supplied)
5
To antenna connector
TV
AC cord
To connect a CATV system using a CATV converter and 2-way splitter
Note
When you use a CATV converter,
refer to the operating Instructions
of it.
6
CONTINUE