Aiwa HV-FX8100U - Manual (Page 30)

ENGLISH
23
To cancel a program
Press MENU. And press SET/TRACKING + or – to select
TIMER REC SET in the menu, then press ENTER. And
press SET/TRACKING + or – to select the unnecessary
program, and press CANCEL.
If the program overlaps another
The overlapped portions will be deleted. The program listed
first on the timer program setting screen has priority over
the succeeding program as illustrated.
Tips
• If “PROGRAM FULL” flashes in the timer program list on
step 1, 8 programs are already set. Cancel an unnecessary
program.
• To confirm the setting, press MENU, select TIMER REC SET
by pressing the SET/TRACKING + or – button and press
ENTER to display the timer program list or press VCR
PLUS+ twice. Press MENU twice to return to the normal
screen.
Notes
• When the power supply is interrupted for more than 5
seconds, the preset program is cleared. In this case, you
have to set the clock and the timer again.
• During timer recording, when the tape reaches the end,
“ ” flashes in the display window.
Changing the setting
To set the daily program
In step 4, press SET/TRACKING + or – repeatedly to
display the desired daily program as follow:
MON-FRI : Monday to Friday
MON-SAT : Monday to Saturday
SUN - SAT : Everyday
To set weekly timer, see page 24.
To extend the recording time
After step 4, press ENTER repeatedly until the end time
flashes, then press SET/TRACKING + or – to change the
setting.
Setting the timer with VCR Plus+ system (continued)
Press SET/TRACKING + or – to select ONCE,
DAILY or WEEKLY.
To record
a single program
daily program
weekly program such as every
Monday (WKL-MON)
Press ENTER.
• The following timer information appears on the
screen.
• If you want to change the setting here, see
“Changing the setting.”
Press ENTER repeatedly until the tape speed
flashes, then press SET/TRACKING + or – to
select SP, LP or SLP (EP).
Press VCR PLUS+.
The timer program list appears.
Press MENU twice to return to the normal
screen.
Press T-REC.
• “ ” appears in the display window, and the VCR
stands by for timer recording.
• If “ ” does not light, a cassette is not inserted.
• The cassette is ejected if the cassette’s erasure
prevention tab has been removed.
• The VCR automatically starts recording at the
programmed time.
• When you press the POWER button instead of the
T-REC button, the VCR does not stand by for timer
recording.
Caution
When “ ” appears in the display window, the tape
functions are not operable. To operate the others, press
T-REC. However, remember to press it again to activate
timer recordings.
3
Select
ONCE
DAILY (See the
next page)
WEEKLY
5
6
7
4
8
DATE START END CH