Lincoln Electric IM665 PRO-CUT 25 - Manual (Page 13)

B-2 OPERATION B-2
USER RESPONSIBILITY
Because design, fabrication, erection and cutting vari-
ables affect the results obtained in applying this type
of information, the serviceability of a product or struc-
ture is the responsibility of the user. Variation such as
plate chemistry, plate surface condition (oil, scale),
plate thickness, preheat, quench, gas type, gas
flowrate and equipment may produce results different
than those expected. Some adjustments to proce-
dures may be necessary to compensate for unique
individual conditions. Test all procedures duplicating
actual field conditions.
OPERATIONAL FEATURES AND
CONTROLS
The PRO-CUT 25 comes with an ON/OFF POWER
SWITCH, OUTPUT CURRENT CONTROL, and
PURGE BUTTON.
DESIGN FEATURES AND
ADVANTAGES
The PRO-CUT 25 design makes plasma cutting
uncomplicated. This list of design features and advan-
tages will help you understand the machine's total
capabilities so that you can get maximum use from
your machine.
- Light weight and portable design for industrial use.
- Continuous control, 12 - 25 amps.
- Reliable touch start mechanism for plasma arc initi-
ation.
- Rapid arc restrike for fast cutting of expanded metal.
- Input over voltage protection.
- Bright 3.0 second timed pilot arc.
- Purge momentary push button.
- Air regulator and pressure gage included.
- Parts-in-Place mechanism to detect proper installa-
tion of consumables and torch.
- Latching Parts-in-Place mechanism. Requires the
operator to turn the machine off and then on to
reset.
- Preflow/Postflow timing. Preflow is eliminated if arc
is re-initiated in Postflow.
- Thermostatic Protection.
- Solid state over-current protection.
- Automatic reconnect for 115 VAC or 230 VAC
inputs.
- Dead front display for machine status.
- Unique electrode and Vortech™ nozzle design for
optimum cooling and long life.
- Swirl texture inside Vortech™ nozzle for better start-
ing reliability and higher quality cuts.
PRO-CUT 25